juniper:os_upgrade:log
OS Upgrade Log
## My log file for downgrading, then upgrading an EX4200. First, I was experiencing problems when I tried to upgrade the OS. As a last ditch effort, I used JWeb, and the upgrade was successful. Then I decided to format the flash and rebuild the Operating System from scratch. That process worked without any issues and took about two hours.
## Enjoy!
mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=89 fileid=51404 gen=1 uid=0 pid=562
mgd: FIPS Self-tests Skipped
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module
Loading the EX-series platform NETPFE moduletype;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_chmic ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertycryptosoft0: <software crypto> on nexus0
pe_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_onIPsec: Initialized Security Association Processing.
_ifup: 1 -> 1
ipsec kld kats kldkldload: can't load kats.ko: File exists
.
Doing additional network setup:.
Starting final network daemons:.
starting local daemons:set cores for group access
.
Boot media /dev/da0 has dual root support
WARNING: JUNOS versions running on dual partitions are not same
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 17579 free (11 frags, 2196 blocks, 0.0% fragmentation)
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
Tue Sep 11 06:27:15 UTC 2018
Amnesiac (ttyu0)
login: root
root@:RE:0% shutdown -r now
Shutdown NOW!
shutdown: [pid 1432]uilt 2018-09-11 05:42:39 UTC
root@:RE:0%
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
SSWaiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...11 4 4 2 2 1 1 0 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 7m53s
recorded reboot as normal shutdown
Rebooting...
U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)
Board: EX4200-24T 2.2
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0xb71e7c+0xd12b0 syms=[0x4+0x9dce0+0x4+0xec41d]
Hit [Enter] to boot immediately, or space bar for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
loader> set ipaddr=192.168.1.56
loader> set netmask=255.255.255.0
loader> set gateway=192.168.1.254
loader> set serverip=192.168.1.204
loader> install --format tftp://192.168.1.204/jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz
Speed: 1000, full duplex
Package /jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz is signed...
/kernel data=0x653a7c+0x91b78 syms=[0x4+0x63e90+0x4+0x98b8a]
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2019, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 14.1X53-D52.4 #0: 2019-11-08 20:05:44 UTC
builder@dagmath-vm01.juniper.net:/volume/build/junos/14.1/service/14.1X53-D52.4/obj-powerpc/junos/bsd/kernels/INSTALL-EX/kernel
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1031798784 (984 MB)
avail memory = 1009856512 (963 MB)
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
umass1: vendor 0x13fe USB DISK 3.0, rev 2.10/1.00, addr 3
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <memory> at device 0.0 (no driver attached)
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pci4: <memory> at device 0.0 (no driver attached)
Initializing product: 41 ..
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </isofs-install-ex> 21059584 bytes at 0x807e2018
da1 at umass-sim1 bus 1 target 0 lun 0
da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
da1: 40.000MB/s transfers
da1: 29573MB (60566016 512 byte sectors: 255H 63S/T 3770C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 42) exited prematurely.
Trying to mount root from cd9660:/dev/md0
[: -eq: unexpected operator
1+0 records in
1+0 records out
512 bytes transferred in 0.000196 secs (2612511 bytes/sec)
Media check on da0 on ex platforms
Formatting installation disk...
1000+0 records in
1000+0 records out
1048576000 bytes transferred in 232.042936 secs (4518888 bytes/sec)
Computing slice and partition sizes for /dev/da0 ...
Formatting target media /dev/da0 ...
Preparing to create slices on /dev/da0
/dev/da0: 2048000 sectors [C:1000 H:64 S:32 SS:512]
Shrinking slice 1 by 256 blocks for alignment
1+0 records in
1+0 records out
512 bytes transferred in 0.000196 secs (2612511 bytes/sec)
Creating slices:
g c1000 h64 s32
p 1 0xA5 256 382720
p 2 0xA5 382976 382976
p 3 0xA5 765952 1024000
p 4 0xA5 1789952 258048
a 1
******* Working on device /dev/da0 *******
fdisk: invalid fdisk partition table found
Computing layout of partitions in /dev/da0s1...
Shrinking partition a by 1792 blocks for alignment
Labeling /dev/da0s1:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 380672 256 unused 0 0
c: 382720 0 unused 0 0 # "raw" part, don't edit
/dev/da0s1a: 185.9MB (380668 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 46.47MB, 2974 blks, 6016 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 95200, 190368, 285536
Computing layout of partitions in /dev/da0s2...
Labeling /dev/da0s2:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s2:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 382720 256 unused 0 0
c: 382976 0 unused 0 0 # "raw" part, don't edit
/dev/da0s2a: 186.9MB (382716 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 46.72MB, 2990 blks, 6016 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 95712, 191392, 287072
Computing layout of partitions in /dev/da0s3...
Shrinking partition d by 256 blocks for alignment
Labeling /dev/da0s3:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s3:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
c: 1024000 0 unused 0 0 # "raw" part, don't edit
d: 767744 256 unused 0 0
e: 256000 768000 unused 0 0
/dev/da0s3d: 374.9MB (767740 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 93.72MB, 5998 blks, 12032 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 191968, 383904, 575840
/dev/da0s3e: 125.0MB (255996 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 31.25MB, 2000 blks, 4096 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 64032, 128032, 192032
Computing layout of partitions in /dev/da0s4...
Shrinking partition d by 256 blocks for alignment
Labeling /dev/da0s4:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s4:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
c: 258048 0 unused 0 0 # "raw" part, don't edit
d: 128768 256 unused 0 0
/dev/da0s4d: 62.9MB (128764 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 15.72MB, 1006 blks, 2048 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 32224, 64416, 96608
[: -eq: unexpected operator
Installing net0:/jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz
/dev/da0s3d: 374.9MB (767740 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 93.72MB, 5998 blks, 12032 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 191968, 383904, 575840
add default: gateway 255.255.255.255: No route to host
PING 192.168.1.204 (192.168.1.204): 56 data bytes
64 bytes from 192.168.1.204: icmp_seq=0 ttl=64 time=0.770 ms
--- 192.168.1.204 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.770/0.770/0.770/0.000 ms
Downloading /jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz from 192.168.1.204
Verified jinstall-ex-4200-14.1X53-D52.4-domestic.tgz signed by PackageProductionRSA_2019
cli: not found
wc: not found
[: -lt: argument expected
Checking package integrity...
Running requirements check first for jbundle-ex-4200-14.1X53-D52.4-...
Running pre-install for jbundle-ex-4200-14.1X53-D52.4-...
Installing jbundle-ex-4200-14.1X53-D52.4- in /tmp/installer.tmp/pa4658.29/jbundle-ex-4200-14.1X53-D52.4-domestic.x4658...
Running post-install for jbundle-ex-4200-14.1X53-D52.4-...
Verified SHA1 checksum of fips-mode-powerpc-14.1X53-D52.4.tgz
Verified SHA1 checksum of jboot-ex-14.1X53-D52.4.tgz
Verified SHA1 checksum of jdocs-ex-14.1X53-D52.4.tgz
Verified SHA1 checksum of junos-ex-14.1X53-D52.4.tgz
Verified SHA1 checksum of junos-ex-4200-14.1X53-D52.4.tgz
Verified SHA1 checksum of jweb-ex-14.1X53-D52.4.tgz
Adding fips-mode-powerpc-14.1X53-D52.4.tgz...
Adding jdocs-ex-14.1X53-D52.4.tgz...
Adding junos-ex-4200-14.1X53-D52.4.tgz...
Adding jweb-ex-14.1X53-D52.4.tgz...
mkdir: /jail: No such file or directory
Initializing the alternate root slice...
Rebooting to complete the installation. Please wait...
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
syncing disks... All buffers synced.
Uptime: 10m39s
Rebooting...
U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)
Board: EX4200-24T 2.2
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0xab5454+0xd54f0 syms=[0x4+0x99dd0+0x4+0xe4236]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2019, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 14.1X53-D52.4 #0: 2019-11-08 20:24:06 UTC
builder@dagmath-vm01.juniper.net:/volume/build/junos/14.1/service/14.1X53-D52.4/obj-powerpc/junos/bsd/kernels/JUNIPER-EX/kernel
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1044381696 (996 MB)
avail memory = 1022398464 (975 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:37
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:37
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
umass1: vendor 0x13fe USB DISK 3.0, rev 2.10/1.00, addr 3
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 19 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 41 ..
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread "wkupdaemon" (pid 44) exited prematurely.
da1 at umass-sim1 bus 1 target 0 lun 0
da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
da1: 40.000MB/s transfers
da1: 29573MB (60566016 512 byte sectors: 255H 63S/T 3770C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/junos via /dev/mdctl...
Mounted junos-ex package on /dev/md0...
Verified manifest signed by PackageProductionEc_2019
Verified jboot signed by PackageProductionEc_2019
Verified junos-ex-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProductionEc_2019
Verified fips-mode-powerpc-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted jdocs-ex package on /dev/md4...
Verified manifest signed by PackageProductionEc_2019
Verified jdocs-ex-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted junos-ex-4200 package on /dev/md6...
Verified manifest signed by PackageProductionEc_2019
Verified junos-ex-4200-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProductionEc_2019
Verified jweb-ex-14.1X53-D52.4 signed by PackageProductionEc_2019
Executing /packages/mnt/jweb-ex-14.1X53-D52.4/mount.post..
Automatic reboot in progress...
Media check on da0 on ex platforms
** Last Mounted on /instrootmnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1544 files, 76539 used, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation)
** Last Mounted on /instrootmnt/var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
94 files, 114 used, 62788 free (12 frags, 7847 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
checking for core dump...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** Last Mounted on /instrootmnt/var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
5 files, 5 used, 188849 free (41 frags, 23601 blocks, 0.0% fragmentation)
** Last Mounted on /instrootmnt/config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
11 files, 10 used, 31596 free (28 frags, 3946 blocks, 0.1% fragmentation)
dump automerge buckets no 0:
dump automerge buckets no 0:
Creating initial configuration...mgd: error: Cannot open configuration file: /config/juniper.conf
mgd: warning: activating factory configuration
mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=89 fileid=51404 gen=1 uid=0 pid=526
mgd: FIPS Self-tests Passed
mgd: commit complete
mgd: ----------------------------------------------------------
mgd: Please login as 'root'. No password is required.
mgd: To start Initial Setup, type 'ezsetup' at the JUNOS prompt.
mgd: To start JUNOS CLI, type 'cli' at the JUNOS prompt.
mgd: ----------------------------------------------------------
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_chmicLoading the CHMIC module
ifpfed_ethinterface ifpfed_eth.1 already present in the KLD 'kernel'!
kldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error
ifpfed_ml_cmn ifpfed_svcskld plLoading the EX-series platform NETPFE module
atform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
starting local daemons:set cores for group access
.
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 17563 free (27 frags, 2192 blocks, 0.0% fragmentation)
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
Fri Nov 8 21:30:06 UTC 2019
Amnesiac (ttyu0)
root@:RE:0% cli
{master:0}
root> NOS 14.1X53-D52.4 built 2019-11-08 20:24:06 UTC
{master:0}
root>
{master:0}
root>
{master:0}
root> show version
fpc0:
--------------------------------------------------------------------------
Model: ex4200-24t
Junos: 14.1X53-D52.4
JUNOS EX Software Suite [14.1X53-D52.4]
JUNOS FIPS mode utilities [14.1X53-D52.4]
JUNOS Online Documentation [14.1X53-D52.4]
JUNOS EX 4200 Software Suite [14.1X53-D52.4]
JUNOS Web Management Platform Package [14.1X53-D52.4]
{master:0}
root> umass1: at uhub0 port 1 (addr 3) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
{master:0}
root> request system reboot
Reboot the system ? [yes,no] (no) yes
*** System shutdown message from root@ ***
System going down in 1 minute
Shutdown at Fri Nov 8 21:35:42 2019.
[pid 1811]
{master:0}
root>
*** System shutdown message from root@ ***
System going down in 30 seconds
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
NNWaiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 5 5 5 0 1 1 1 0 0 1 1 1 0 0 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 9m11s
recorded reboot as normal shutdown
Rebooting...
U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)
Board: EX4200-24T 2.2
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0xab5454+0xd54f0 syms=[0x4+0x99dd0+0x4+0xe4236]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2019, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 14.1X53-D52.4 #0: 2019-11-08 20:24:06 UTC
builder@dagmath-vm01.juniper.net:/volume/build/junos/14.1/service/14.1X53-D52.4/obj-powerpc/junos/bsd/kernels/JUNIPER-EX/kernel
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1044381696 (996 MB)
avail memory = 1022398464 (975 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:37
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:37
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 19 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 41 ..
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 44) exited prematurely.
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/junos via /dev/mdctl...
Mounted junos-ex package on /dev/md0...
Verified manifest signed by PackageProductionEc_2019
Verified jboot signed by PackageProductionEc_2019
Verified junos-ex-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProductionEc_2019
Verified fips-mode-powerpc-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted jdocs-ex package on /dev/md4...
Verified manifest signed by PackageProductionEc_2019
Verified jdocs-ex-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted junos-ex-4200 package on /dev/md6...
Verified manifest signed by PackageProductionEc_2019
Verified junos-ex-4200-14.1X53-D52.4 signed by PackageProductionEc_2019
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProductionEc_2019
Verified jweb-ex-14.1X53-D52.4 signed by PackageProductionEc_2019
Executing /packages/mnt/jweb-ex-14.1X53-D52.4/mount.post..
Automatic reboot in progress...
Media check on da0 on ex platforms
** Last Mounted on /instrootmnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1544 files, 76539 used, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation)
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
418 files, 1043 used, 61859 free (123 frags, 7717 blocks, 0.2% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
checking for core dump...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
12 files, 74 used, 188780 free (28 frags, 23594 blocks, 0.0% fragmentation)
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
23 files, 30 used, 31576 free (40 frags, 3942 blocks, 0.1% fragmentation)
rm: /var/etc/pam.con: Operation not permitted
dump automerge buckets no 0:
dump automerge buckets no 0:
mkdir: /mfs/var/sdb: No such file or directory
mkdir: /mfs/var/sdb: No such file or directory
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=74 fileid=51404 gen=1 uid=0 pid=510
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module
/boot/modules -> /boot/modules;/interface ifpfed_eth.1 already present in the KLD 'kernel'!
modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_chmic ifLoading the EX-series platform NETPFE module
pfed_ethkldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error
ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
starting local daemons:set cores for group access
.
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 17563 free (27 frags, 2192 blocks, 0.0% fragmentation)
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
Fri Nov 8 21:38:38 UTC 2019
Amnesiac (ttyu0)
login: root
Broadcast Message from root@
(no tty) at 21:39 UTC...
ALERT:Auto image Upgrade will start. This can terminate config CLI sess
ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the
following: 'edit; delete chassis auto-image-upgrade; commit'.
root@:RE:0% cli
{master:0}
root> show version
fpc0:
--------------------------------------------------------------------------
Model: ex4200-24t
Junos: 14.1X53-D52.4
JUNOS EX Software Suite [14.1X53-D52.4]
JUNOS FIPS mode utilities [14.1X53-D52.4]
JUNOS Online Documentation [14.1X53-D52.4]
JUNOS EX 4200 Software Suite [14.1X53-D52.4]
JUNOS Web Management Platform Package [14.1X53-D52.4]
{master:0}
root> show system snapshot media internal
fpc0:
--------------------------------------------------------------------------
Information for snapshot on internal (/dev/da0s1a) (primary)
Creation date: Nov 8 21:26:11 2019
JUNOS version on snapshot:
jdocs-ex: 14.1X53-D52.4
junos : ex-14.1X53-D52.4
junos-ex-4200: 14.1X53-D52.4
jweb-ex: 14.1X53-D52.4
Information for snapshot on internal (/dev/da0s2a) (backup)
Creation date: Nov 8 21:27:22 2019
JUNOS version on snapshot:
jdocs-ex: 14.1X53-D52.4
junos : ex-14.1X53-D52.4
junos-ex-4200: 14.1X53-D52.4
jweb-ex: 14.1X53-D52.4
{master:0}
root> ...l/jinstall-ex-4200-15.1R7.9-controlled-signed.tgz no-copy
Checking pending install on fpc0
Validating on fpc0
Done with validate of </var/tmp/mchassis-install.tgz> on VC members
fpc0:
Verify the signature of the new package
Verified jinstall-ex-4200-15.1R7.9-controlled.tgz signed by PackageProductionRSA_2018
WARNING: A reboot is required to install the software
WARNING: Use the 'request system reboot' command immediately
{master:0}
root> request system reboot
Reboot the system ? [yes,no] (no) yes
Shutdown at Fri Nov 8 22:02:10 2019.
[pid 2336]
*** System shutdown message from root@ ***
System going down in 1 minute
{master:0}
root>
*** System shutdown message from root@ ***
System going down in 30 seconds
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
NWaiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...4 4 3 3 1 2 2 2 1 0 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 26m24s
recorded reboot as normal shutdown
Rebooting...
U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)
Board: EX4200-24T 2.2
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Package /mchassis-install.tgz is signed...
/kernel data=0x69b300+0x93624 syms=[0x4+0x67960+0x4+0xa051b]
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2018, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R7.9 #0: 2018-09-11 05:30:26 UTC
builder@watatsumi.juniper.net:/volume/build/junos/15.1/release/15.1R7.9/obj/powerpc/junos/bsd/kernels/INSTALL-EX/kernel
can't re-use a leaf (all_slot_serialid)!
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1027604480 (980 MB)
avail memory = 1005342720 (958 MB)
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <memory> at device 0.0 (no driver attached)
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pci4: <memory> at device 0.0 (no driver attached)
Initializing product: 41 ..
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </isofs-install-ex> 22267904 bytes at 0x808367a8
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 43) exited prematurely.
Trying to mount root from cd9660:/dev/md0
[: -eq: unexpected operator
1+0 records in
1+0 records out
512 bytes transferred in 0.000189 secs (2708050 bytes/sec)
Media check on da0 on ex platforms
Computing slice and partition sizes for /dev/da0 ...
32+0 records in
32+0 records out
16384 bytes transferred in 0.182813 secs (89622 bytes/sec)
Checking s1a label...please wait
** Last Mounted on /instrootmnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1544 files, 76539 used, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation)
tunefs: soft updates remains unchanged as enabled
Checking s2a label...please wait
Computing layout of partitions in /dev/da0s2...
Labeling /dev/da0s2:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s2:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 382720 256 unused 0 0
c: 382976 0 unused 0 0 # "raw" part, don't edit
/dev/da0s2a: 186.9MB (382716 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 46.72MB, 2990 blks, 6016 inodes.
with soft updates
super-block backups (for fsck -b #) at:
32, 95712, 191392, 287072
Checking s3d label...please wait
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
3 files, 68586 used, 120268 free (28 frags, 15030 blocks, 0.0% fragmentation)
tunefs: soft updates remains unchanged as enabled
Checking s3e label...please wait
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
429 files, 1135 used, 61767 free (175 frags, 7699 blocks, 0.3% fragmentation)
tunefs: soft updates remains unchanged as enabled
Checking s4d label...please wait
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
25 files, 32 used, 31574 free (38 frags, 3942 blocks, 0.1% fragmentation)
tunefs: soft updates remains unchanged as enabled
[: -eq: unexpected operator
Installing disk0s3d:/mchassis-install.tgz
Verified jinstall-ex-4200-15.1R7.9-controlled.tgz signed by PackageProductionRSA_2018 method RSA2048+SHA1
cli: not found
wc: not found
[: -lt: argument expected
date: connect: Can't assign requested address
Checking package integrity...
Running requirements check first for jbundle-ex-4200-15.1R7.9-...
Running pre-install for jbundle-ex-4200-15.1R7.9-...
Installing jbundle-ex-4200-15.1R7.9- in /tmp/installer.tmp/pa4658.52/jbundle-ex-4200-15.1R7.9-controlled.x4658...
Running post-install for jbundle-ex-4200-15.1R7.9-...
Verified SHA1 checksum of fips-mode-powerpc-15.1R7.9.tgz
Verified SHA1 checksum of jboot-ex-15.1R7.9.tgz
Verified SHA1 checksum of jcrypto-ex-15.1R7.9.tgz
Verified SHA1 checksum of jdocs-ex-15.1R7.9.tgz
Verified SHA1 checksum of junos-ex-15.1R7.9.tgz
Verified SHA1 checksum of junos-ex-4200-15.1R7.9.tgz
Verified SHA1 checksum of jweb-ex-15.1R7.9.tgz
Adding fips-mode-powerpc-15.1R7.9.tgz...
Adding jcrypto-ex-15.1R7.9.tgz...
Adding jdocs-ex-15.1R7.9.tgz...
Adding junos-ex-4200-15.1R7.9.tgz...
Adding jweb-ex-15.1R7.9.tgz...
mkdir: /jail: No such file or directory
Rebooting to complete the installation. Please wait...
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 5m35s
Rebooting...
U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)
Board: EX4200-24T 2.2
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xb71e7c+0xd12b0 syms=[0x4+0x9dce0+0x4+0xec41d]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2018, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R7.9 #0: 2018-09-11 05:42:39 UTC
builder@watatsumi.juniper.net:/volume/build/junos/15.1/release/15.1R7.9/obj/powerpc/junos/bsd/kernels/JUNIPER-EX/kernel
can't re-use a leaf (all_slot_serialid)!
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1044381696 (996 MB)
avail memory = 1022398464 (975 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:37
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:37
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 19 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 41 ..
Loading Redundant LT driver
Registered AMT tunnel Encap with UDP Tunnel!
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread "wkupdaemon" (pid 44) exited prematurely.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/junos via /dev/mdctl...
Mounted junos-ex package on /dev/md0...
stty: stdin isn't a terminal
Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified jboot signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified junos-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified fips-mode-powerpc-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified jcrypto-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified jdocs-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256
Mounted junos-ex-4200 package on /dev/md8...
Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified junos-ex-4200-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256
Mounted jweb-ex package on /dev/md10...
Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256
Verified jweb-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256
Executing /packages/mnt/jweb-ex-15.1R7.9/mount.post..
Error execution /packages/mnt/jweb-ex-15.1R7.9/mount.post: path /var/jail does not exist
Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 12342 free (22 frags, 1540 blocks, 0.0% fragmentation)
** Last Mounted on /instrootmnt/var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
431 files, 1137 used, 61765 free (173 frags, 7699 blocks, 0.3% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
checking for core dump...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** Last Mounted on /instrootmnt/var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
5 files, 5 used, 188849 free (33 frags, 23602 blocks, 0.0% fragmentation)
** Last Mounted on /instrootmnt/config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
25 files, 32 used, 31574 free (38 frags, 3942 blocks, 0.1% fragmentation)
/: update error: blocks 0 files 1
mkdir: /mfs/var/sdb: No such file or directory
mkdir: /mfs/var/sdb: No such file or directory
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=74 fileid=51404 gen=1 uid=0 pid=561
mgd: FIPS Self-tests Skipped
mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=74 fileid=51404 gen=1 uid=0 pid=624
mgd: FIPS Self-tests Skipped
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module
Loading the EX-series platform NETPFE moduletype;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_chmic ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_cryptosoft0: <software crypto> on nexus0
arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
IPsec: Initialized Security Association Processing.
ipsec kld kats kldkldload: can't load kats.ko: File exists
.
Doing additional network setup:.
Starting final network daemons:.
starting local daemons:set cores for group access
.
Boot media /dev/da0 has dual root support
WARNING: JUNOS versions running on dual partitions are not same
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation)
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
Tue Sep 11 06:15:33 UTC 2018
Amnesiac (ttyu0)
Broadcast Message from root@
(no tty) at 6:16 UTC...
ALERT:Auto image Upgrade will start. This can terminate config CLI sess
ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the
following: 'edit; delete chassis auto-image-upgrade; commit'.
root@:RE:0% cli
{master:0}
root> show version
fpc0:
--------------------------------------------------------------------------
Model: ex4200-24t
Junos: 15.1R7.9
JUNOS EX Software Suite [15.1R7.9]
JUNOS FIPS mode utilities [15.1R7.9]
JUNOS Crypto Software Suite [15.1R7.9]
JUNOS Online Documentation [15.1R7.9]
JUNOS EX 4200 Software Suite [15.1R7.9]
JUNOS Web Management Platform Package [15.1R7.9]
{master:0}
root> show system snapshot media internal
fpc0:
--------------------------------------------------------------------------
Information for snapshot on internal (/dev/da0s1a) (backup)
Creation date: Nov 8 21:26:11 2019
JUNOS version on snapshot:
jdocs-ex: 14.1X53-D52.4
junos : ex-14.1X53-D52.4
junos-ex-4200: 14.1X53-D52.4
jweb-ex: 14.1X53-D52.4
Information for snapshot on internal (/dev/da0s2a) (primary)
Creation date: Sep 11 06:12:40 2018
JUNOS version on snapshot:
jcrypto-ex: 15.1R7.9
jdocs-ex: 15.1R7.9
junos : ex-15.1R7.9
junos-ex-4200: 15.1R7.9
jweb-ex: 15.1R7.9
{master:0}
root> request system snapshot slice alternate
fpc0:
--------------------------------------------------------------------------
Formatting alternate root (/dev/da0s1a)...
Copying '/dev/da0s2a' to '/dev/da0s1a' .. (this may take a few minutes)
The following filesystems were archived: /
{master:0}
root> show system snapshot media internal
fpc0:
--------------------------------------------------------------------------
Information for snapshot on internal (/dev/da0s1a) (backup)
Creation date: Sep 11 06:23:00 2018
JUNOS version on snapshot:
jcrypto-ex: 15.1R7.9
jdocs-ex: 15.1R7.9
junos : ex-15.1R7.9
junos-ex-4200: 15.1R7.9
jweb-ex: 15.1R7.9
Information for snapshot on internal (/dev/da0s2a) (primary)
Creation date: Sep 11 06:12:40 2018
JUNOS version on snapshot:
jcrypto-ex: 15.1R7.9
jdocs-ex: 15.1R7.9
junos : ex-15.1R7.9
junos-ex-4200: 15.1R7.9
jweb-ex: 15.1R7.9
{master:0}
root> show system storage
fpc0:
--------------------------------------------------------------------------
Filesystem Size Used Avail Capacity Mounted on
/dev/da0s2a 184M 160M 9.4M 94% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 282M 282M 0B 100% /packages/mnt/junos
/dev/md1 6.8M 2.1M 4.1M 33% /packages/mfs-fips-mode-powerpc
/dev/md2 5.4M 5.4M 0B 100% /packages/mnt/fips-mode-powerpc-15.1R7.9
/dev/md3 6.7M 2.0M 4.1M 33% /packages/mfs-jcrypto-ex
/dev/md4 5.3M 5.3M 0B 100% /packages/mnt/jcrypto-ex-15.1R7.9
/dev/md5 8.7M 4.1M 3.9M 51% /packages/mfs-jdocs-ex
/dev/md6 12M 12M 0B 100% /packages/mnt/jdocs-ex-15.1R7.9
/dev/md7 45M 40M 1.4M 97% /packages/mfs-junos-ex-4200
/dev/md8 83M 83M 0B 100% /packages/mnt/junos-ex-4200-15.1R7.9
/dev/md9 14M 9.1M 3.5M 72% /packages/mfs-jweb-ex
/dev/md10 26M 26M 0B 100% /packages/mnt/jweb-ex-15.1R7.9
/dev/da0s3e 123M 1.7M 111M 2% /var
/dev/md11 252M 12K 232M 0% /tmp
/dev/da0s3d 369M 17M 323M 5% /var/tmp
/dev/da0s4d 62M 68K 57M 0% /config
/dev/md12 118M 20M 89M 18% /var/rundb
procfs 4.0K 4.0K 0B 100% /proc
/var/jail/etc 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/etc
/var/jail/run 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/run
/var/jail/tmp 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/tmp
/var/tmp 369M 17M 323M 5% /packages/mnt/jweb-ex-15.1R7.9/jail/var/tmp/uploads
devfs 1.0K 1.0K 0B 100% /packages/mnt/jweb-ex-15.1R7.9/jail/dev
/var/jail/jweb-app 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/jweb-app
/dev/md13 6.8M 2.1M 4.1M 33% /packages/mfs-fips-mode-powerpc
/dev/md14 6.7M 2.0M 4.1M 33% /packages/mfs-jcrypto-ex
/dev/md15 8.7M 4.1M 3.9M 51% /packages/mfs-jdocs-ex
/dev/md16 45M 40M 1.4M 97% /packages/mfs-junos-ex-4200
/dev/md17 14M 9.1M 3.5M 72% /packages/mfs-jweb-ex
{master:0}
root>
juniper/os_upgrade/log.txt · Last modified: 2019/12/10 06:39 by Derg Enterprises
Page Tools
