juniper:tshoot_good
- ⇒ printenv
- bootcmd=cp.b 0xbfe00000 0x100000 0x100000; bootelf 0x100000
- bootdelay=1
- baudrate=9600
- autoload=n
- loaddev=disk0:
- ipaddr=192.168.168.137
- gatewayip=192.168.168.1
- serverip=192.168.168.9
- netmask=255.255.255.0
- ethaddr=00:24:dc:18:01:00
- boot.devlist=nand-flash:usb
- reduce_dp_memory=0
- wmem_selector=4520
- boot.status=0x1
- boot.current=primary
- loadaddr=0x20000000
- numcores=2
- boot.ver=2.8
- boot.upgrade.loader=0xbfe00000
- boot.upgrade.uboot=0xbfc00000
- boot.btsq.start=0x003fa000
- boot.btsq.len=0x00002000
- boot.env.start=0x003fe000
- boot.env.size=0x00002000
- boot.upgrade.uboot.hdr=0x00000030
- boot.upgrade.uboot.data=0x00000100
- boot.upgrade.loader.hdr=0x002fffc0
- boot.upgrade.loader.data=0x00200000
- stdin=serial
- stdout=serial
- stderr=serial
- env_addr=0xbfffe000
- env_size=0x2000
- flash_base_addr=0xbfc00000
- flash_size=0x400000
- ethact=octeth0
- post.usb=PASSED
- post.eeprom=PASSED
- post.memory=PASSED
- post.uboot-crc=PASSED
juniper/tshoot_good.txt · Last modified: 2016/10/14 06:07 by Derg Enterprises
Page Tools
